The Haws® thermostatic mixing valve model 9201E mixes hot and cold water and provides a safe tepid water supply for emergency showers and eyewash stations. Flow range of 4 to 117 liters/minute provides service for one emergency combination shower or multiple eyewashes, reducing complexity and hardware costs.
Technical information thermostatic mixing valve model 9201E
- Outlet temperature factory setting: 26°C.
- Maximum operating pressure: 8.62 bar.
- Temperature adjustment range: 16 – 35° C.
- Maximum inlet temperature: 82° C.
- Recommended inlet temperature: 60° C.
- Minimum inlet temperature: 49° C
- Water inlets: BSP 1-1/4″
- Water outlet: BSP 1-1/4″
Characteristics
- Best-in-class cold water bypass flow (65% of rated tempered water flow) means continued protection under adverse conditions.
- Actively suspends hot water flow when cold water supply is lost to protect against scalding.
- Lowest internal pressure drop for this valve class – essential where supply pressure is low.
- Paraffin-based thermal actuation technology keeps outlet temperature within tight specifications to prevent scalding and hypothermia.
- Superior shuttle design combined with premium material selection eliminates valve binding and reduces maintenance costs.
- Innovative funnel design generates turbulent flow to ensure consistent temperature blending across entire flow range.
- Lime and calcium resistant materials used throughout prevent valve sticking and provide a long service life.
Model 9202E Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate measurement.)
- A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate)
- Modular brass design with internal check stops
- Over-sized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
- Cold water by-pass valves are closed during normal operation, regardless of flow rate.
CSA Certified to ASSE 1071 and applicable sections of CSA B125.3.
9201EW – Thermostatic Mixing ValveModel 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)
- A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)
- Modular brass design with supplied check valves
- Over-sized valve seats resist failures caused by foreign matter
- Efficient funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.
9201EFE – Thermostatic Mixing Valve – 38 liters/minModel 9201EFE Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)
- A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
- Modular brass design with internal check stops
- Over-sized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
- Cold water by-pass valves are closed during normal operation, regardless of flow rate.
CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.
8356WCSM AXION – Surface Mount Shower and EyewashModel 8356WCSM AXION wheelchair accessible surface mounted combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Perfect for mounting on block or solid walls which cannot be cut into
- Easy access exterior mounted in-line strainer
- One piece drain tray catches waste fluid during eyewash use
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with electro-polished finish
- Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested
- EN 15154 complaint
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8122HWC AXION – Barrier-Free Emergency Drench ShowerHaws 8122HWC AXION AXION MSR barrier-free drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include a universal emergency sign and extended 56″ (142.2 cm) pull rod for wheelchair accessibility.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Reduced installation time due to pre-built valve assembly and units design to mount horizontally from any wall
- Solid construction from Schedule 40 hot-dipped galvanized steel make for a durable long lasting product
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7655WCSM AXION – Wheelchair Accessible Surface Mount EyewashModel 7655WCSM AXION wheelchair accessible surface mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Perfect for mounting on block or solid walls which cannot be cut into
- Easy access exterior mounted in-line strainer
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smudge resistant bead blast finish
- The eye/face wash head is easily activated by the emergency equipment’s pull-down design
- ANSI Z358.1 tempering compliance options
- EN 15154 c ompliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7777 AXION – Corrosion Resistant Pedestal EyewashModel 7777 AXION all stainless steel pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit also is equipped with an in-line 50 x 50 mesh water strainer and stainless steel dust cover so when debris is present, the irrigation process stays protected. Solid mounted pedestal design allows the 7777 AXION to be placed securely in multiple locations.
- A great addition to unsafe environments where the eyes and face may be exposed to corrosive materials
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
- Corrosion resistant construction from Type 304 Stainless Steel make for one corrosive resistant piece of equipment
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
7656WCSM AXION – Wheelchair Accessible Surface Mount EyewashModel 7656WCSM AXION wheelchair accessible eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Perfect for mounting on block or solid walls which cannot be cut into
- The hide-away design allows the 7656WCSM AXION to stay protected from debris when not in use
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with electro-polished finish
- Easy access exterior mounted in-line strainer
- One piece drain tray catches waste fluid during eyewash use
- The eye/face wash head is easily activated by the emergency equipment’s pull-down design
- ANSI Z358.1 tempering compliance options
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7656WCC AXION – AXION® MSR Barrier-Free Recessed Eye/Face WashModel 7656WCC AXION barrier-free, recessed eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- The hide-away design allows the 7656WCC AXION to stay protected from debris when not in use
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with electro-polished finish
- One piece drain tray catches waste fluid during eyewash use
- Easy access exterior mounted in-line strainer
- The eye/face wash head is easily activated by the emergency equipment’s pull-down design
- ANSI Z358.1 tempering compliance options
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7655WCC AXION – Barrier-Free Recessed EyewashModel 7655WCC AXION barrier-free eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Easy access exterior mounted in-line strainer
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smudge resistant bead blast finish
- The eye/face wash head is easily activated by the emergency equipment’s pull-down design
- ANSI Z358.1 tempering compliance options
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7620 – Faucet Mounted Eyewash AXION® eyePOD®Model 7620 AXION eyePOD (patent pending) faucet mounted eyewash incorporates the revolutionary inverted flow design, which is the only on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctor office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. The symmetrical ‘pod’ look of the eyewash is constructed of stainless steel and given a polished finish for a durable, esthetically pleasing piece of emergency equipment that can be used for industrial situations and doctors offices alike.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Thermostatic shutoff that will protect the user from water over 37.8° C by shutting off the eyewash
- Supplied with a standard 55/64-27 female connection. Have a different size? Haws has that covered also with 4 other of the most commonly used faucet adapters including a 15/16-27 male, 13/16-27 male, 3/8-18 male and 13/16-24 female, to accommodate most home, commercial and lab faucet applications
- Also supplied is a 1 gpm (3.8 L) laminar flow faucet outlet for hospitals or anywhere a precise flow pattern is a must
- Dim; Diameter 8.9 cm, height (from top to faucet outlet) 5 cm
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.