Model 7612LH AXION sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
- A dust cover allows the 7612LH AXION to stay protected from debris when not in use
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Counter top mounted on the left side of a sink
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
7612 AXION – Sink Mount EyewashModel 7612 AXION sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
- A Dust cover allows the 7612 AXION to stay protected from debris when not in use
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Side mount design allows the unit to be mounted from the right side of the sink
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
7610 AXION – Sink Mount Eye/Face WashLab units like the 7610 AXION barrier-free wall or deck mount pull down eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Unit can be deck or wall mounted with easy change-over instructions
- Extended-length pull down arms are designed to accommodate wheelchair access
- Eye/face wash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Dust cover allows for the 7610 AXION to stay protected from debris when not in use
- Activation and deactivation occur at a 30 degree angle from horizontal limiting splash of water onto counter or wall
- Rear mount design allows the sink to remain open to other uses
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7603 – Portable Air-Charged Emergency EyewashThe Haws 7603 is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 56.8 liter personal portable eyewash provides a reliable source of safety for the irrigation process.
- Features a 56.8 liter stainless steel tank
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Measurements: 100.3 cm high, 40.6 cm diameter
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7601.37 – Portable Emergency Air Charged EyewashHazardous chemical spills occur in isolated areas all over the world everyday and, Haws is working to position models like this pressurized 37 gallon (140 L) portable eyewash and body spray in such areas, providing a reliable source of safety for the irrigation process. More specifically, Model 7601.37 is able to do so by combining the use of twin soft-flo eyewash heads with a face and body-spray head.
- Features a 37 gallon (140 L) ASME rated stainless steel tank
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Includes a 6 foot (182.9 cm) hose that extends the body-spray reach expanding the unit’s protective capabilities
- Measurements: 60″ (152.4 cm) high, 27″ (68.6 cm) deep
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7501T240H – 240V Tempered, Gravity-Fed, Portable Eyewash (Haz Loc)Compact portable tempered eyewash model 7501T240H is ideal for remote locations. The 9-gallon (34 L), gravity-fed, hazardous location eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures to -30°F (-34°C) for locations without access to a continuous potable water source. The self-contained heating blanket electrical system uses NEMA 4 rated components. 240V, 2A, 1 phase electrical requirement.
- Rated for hazardous location Class 1, Div 2.
- Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
- A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
- Relocation is simple due to the easily mounted bracket (included) and light design of this 9 gallon (34 L) portable
- Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung
Built with CSA certified components.
7461 AXION – Pedestal mount eyewash – stainless steel bowlThe Haws® eyewash model 7461 AXION is the optimal solution for industrial applications where high corrosion resistance is required. It complies to the standards EN 15154-2 and ANSI Z358.1. The stainless steel bowl makes this permanently installed face+eyewash corrosion resistant and very rugged. The patented AXION® shower head delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 935 x 370 x 281 mm
- Water inlet: G 1/2″
- Water outlet: G 1 1/4″
Characteristics Eyewash 7461 AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Reliable chrome-plated brass stay-open ball valve with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris
- Hot-dipped galvanized steel pipe and fittings
- Powder-coated cast-iron 23 cm diameter floor flange
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
The Haws® eyewash model 7260B AXION is the optimal solution for industrial applications. It complies to the standards EN 15154-2 and ANSI Z358.1. An ABS plastic bowl makes this permanently installed eye wash very durable. The patented AXION® shower head delivers reliable a compliant water jet for rinsing eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid. Model 7260B also includes a chromate-protected cast aluminum wall bracket, yellow plastic pop-off dust cover for eye wash head and universal safety sign.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 300 x 371 x 359 mm
- Water inlet: G 1/2″
- Water outlet: G 1″
Characteristics Eye Wash 7260B AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Alkalis resistant 28 cm green ABS plastic bowl
- Reliable chrome-plated brass stay-open ball valve with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
Model 7260BT AXION wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (28 cm) green ABS plastic receptor, aluminum wall bracket and tailpiece and trap
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ BSP. Waste: 1- 1/2″ BSP
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7261 AXION – Pedestal mount eyewash – ABS bowl
Model 7261 AXION pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 28 cm green ABS plastic receptor and 1-1/4″ BSP galvanized stanchion
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ BSP. Waste: 1- 1/4″ BSP
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7324 AXION – Wall mount eyewash – without bowlHaws eyewash 7324 AXION features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Unit is equipped with a pop-off dust cover, so when debris is present, the irrigation process stays protected
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
- Floor drain is recommended for this unit
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7460B AXION – Wall mount eyewash – stainless steel bowlThe Haws® eye wash model 7460B AXION is the optimal solution for industrial applications where high corrosion resistance is required. It complies to the standards EN 15154-2 and ANSI Z358.1. The stainless steel bowl makes this permanently installed eye wash corrosion resistant and very rugged. The patented AXION® shower head delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid. Model 7460B also includes a chromate-protected cast aluminum wall bracket, yellow plastic pop-off dust cover for eye wash head and a safety sign.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 300 x 376 x 358 mm
- Water inlet: G 1/2″
- Water outlet: G 1″
Characteristics Eye Wash 7460B AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Reliable chrome-plated brass stay-open ball valve with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris
- Including universal safety sign
- Wide range of options for adapting to on-site requirements